What is the value proposition of the Harsoria offerings?
Ans:
Harsoria products have the highest standards
of reliability at the most economical cost.
Which international standards does Harsoria follow?
Ans: Harsoria follows the guidelines
and recommendations of ISO 13485, and Council Directive
93/42/EEC concerning medical devices.
What products does Harsoria offer?
Ans: Currently, Harsoria offers the entire
range of IV Cannulae, i.e.:
1. IV Cannulae with injection port and wings
2. IV Cannulae without injection port with small wings
3. IV Cannulae without injection port without wings or
projection
IV Cannulae are available with clear or radiopaque catheters.
The following are the specifications for each size:
| Sizes
& Technical Specification:
|
|
Gauge |
Color
Code
|
Catheter |
Packing
Inner/Outer |
| Ext.
Dia.
mm |
Length
mm |
Flow Rate
ml/ min |
| 14G |
Orange |
2.1 |
45 |
300 |
100/1000 |
| 16G |
Grey |
1.8 |
45 |
200 |
| 17G |
White |
1.5 |
45 |
140 |
| 18G |
Green |
1.3 |
45 |
90 |
| 20G |
Pink |
1.1 |
33 |
61 |
| 22G |
Blue |
0.9 |
25 |
36 |
| 24G |
Yellow |
0.7 |
19 |
18 |
How do I order samples/catalogues of Harsoria products?
Ans: Samples/ Catalogues can be requested
from our website, or through email, or by writing to
our corporate address.
CLICK
HERE to order samples/ catalogues,
How do I place orders for Harsoria products?
Ans: You can place orders through our
website, email, or by writing to our corporate address.
To tell us about your order requirements, .
CLICK HERE
How do I know that Harsoria products are safe to
use?
Ans:
Harsoria products follow a regimen of physical, biological
and chemical tests before they are despatched to the
consumer. Among other things, tests are done to confirm
that products are pyrogen free and sterile. Sophisticated
tests will reveal any chance of harm that can be done
to the user, and any such products if found are rejected.
How does Harsoria sterilise products?
Ans:
All Harsoria products are sterilised with an in-house
steriisation facility that follows EN 550 norms. Sterilisation
is done with Ethylene Oxide gas, and the products are
subsequently validated and tested for sterility.
Why are Radiopaque Catheters used ?
Ans: Fluroscopy stripes in catheters
act as markers. The stripes absorb x-rays, making the
catheter visible using fluroscopy. The fluroscopy stripes,
just like the rest of the catheter, are biocompatible.
What makes Harsoria products painless?
Ans: Harsoria IV Cannulae use siliconised
triple bevel cut needles for painless venipuncture.
The catheters are made of PTFE, which offers very low
resistance during insertion in the vein. The catheters
are tapered at the end to provide a painless transition
between the needle and the catheter tip. |
